Pelican MD3200M Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
11
INSTALLATION AND CONNECTION
4. Connecting & Running
4.1. Connecting camera
(1) Connect CCTV camera to MD3200M with BNC cable as below.
<Note>
1. The video type for all channels should be either NTSC or PAL, not be combined both.
2. MD3200M sets video signal’s impedance (75Ω ) automatically.
75-Ohm termination register is always connected on video input, and can't be removed. So
MD3200M's video input must be a terminal of the connection.
3. Video Type(NTSC/PAL) should be changed after opeting MD3200M. The order of camera
recognition follows Ch1 camera through Ch32 camera and 1
st
recognized camera type leads other
camera type.
4.2. Connecting monitor
(1) Connect CCTV monitor to MD3200M with BNC cable as shown below;
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Comentarios a estos manuales

Sin comentarios